Google translate

http://www.newcom.cv.ua/modules/mod_image_show_gk4/cache/selan_showgk-is-182.jpglink
http://www.newcom.cv.ua/modules/mod_image_show_gk4/cache/BOOT_showgk-is-182.jpglink
http://www.newcom.cv.ua/modules/mod_image_show_gk4/cache/psin_showgk-is-182.jpglink
http://www.newcom.cv.ua/modules/mod_image_show_gk4/cache/KX-TDE200_showgk-is-182.jpglink
http://www.newcom.cv.ua/modules/mod_image_show_gk4/cache/tft_showgk-is-182.jpglink
http://www.newcom.cv.ua/modules/mod_image_show_gk4/cache/M1_manualgk-is-182gk-is-182.jpglink
http://www.newcom.cv.ua/modules/mod_image_show_gk4/cache/sh_mb_lgk-is-182.jpglink
http://www.newcom.cv.ua/modules/mod_image_show_gk4/cache/shima_sesgk-is-182.jpglink
http://www.newcom.cv.ua/modules/mod_image_show_gk4/cache/GaleryStoll.mag_yarn2lgk-is-182.jpglink
«
»
Loading…

    Наши координаты:

+380 (50) 549 47 19
+380 (372) 51 75 76

пр. Независимости, 74
г. Черновцы,
Украина
58005

 

Учимся программировать Stoll CMS.

CNCA -3KT. Programming manual

CNCA -3KT. Programming manual

Chapter 1  - describes chiefly the text-input commands, which can be used for alterations of the existing text.

       Chapter 2  - describes the control commands for the machine.

               Chapter 3  - describes knitting with jacquard.

                        Chapter4  - contains advice and examples for experienced operators.

                               Chapter 5 - contains a table of all commands in a short form.

Добавить комментарий


Защитный код
Обновить